Twisted Messes | Skill RDA 24mm

Twisted Messes | Skill RDA 24mm

Sale price$35.95


Pickup available at Itsvaping - Tuggerah Usually ready in 2 hours

Twisted Messes | Skill RDA 24mm


Itsvaping - Tuggerah

Pickup available, usually ready in 2 hours

168 Pacific Highway
Shop 4
Tuggerah NSW 2259

Only 2 units left

*Must be familiar with coil-building. Coils not pre-installed*

The Skill RDA was designed by VapersMD and brought to life by Twisted Messes. The RDA itself is 24mm, low profile design and features single or dual air flow configurations. The deck can hold 4.5mm of juice and has a big building space due to it's 2 post design. This RDA also comes with a Squonk pin.

Please note:

  • As always, remember to prime new coils. Place a few drops of vape juice in the coil, install the coil and wait five minutes before using. This ensures the coil is saturated and avoids getting dry hits or burning your coil.
  • Find Rebuildable Tools here

Skill RDA Features:

  • Black anodized aluminum Top Cap 
  • 24mm RDA 
  • 24k Gold plated 304 stainless steel deck 
  • 4.5mm deep juice wells 
  • 2 post design with 3mm wide vertical slots 
  • Single & dual coil air-flow control 
  • 24k Gold plated brass 510 
  • ULTEM composite drip tip 
  • PEEK Insulators 
  • Serialized

Package Includes:

  • 1 x Skill RDA
  • 6 x 24k Gold Plated Post Screws:
  • 2 x slot -  2 x Cross - 2 x Hex
  • 1 x Squonk Pin

This product is for advanced users only!

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:

Rebuildable atomizer coils and wicks have known risks. Rebuildables are for experts, not average or beginner vapers with no multi-meter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

  1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
  2. If it is not tested it is entirely the risk of the user.
  3. Faulty wicks/coils WILL blow electronic devices.
  4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
  5. No new coil/wick assembly should be used on an electronic device until known to be safe.
  6. These items destroy electronic devices if faulty. This is a known issue.