Smok TF-RTA

Smoktech

Smok TF-RTA
  • Smok TF-RTA
  • Smok TF-RTA
  • Smok TF-RTA

Smok TF-RTA

TF-RTA is different from other rebuildable tank atomizers on the market: exclusively applied the super big deck-off-base design. With 16mm in diameter, the deck space has increased by 30 percent (compared with the TF-RCA deck) and be more convenient to build. The deck-off-base design makes replacing so easy and above all else, it's more economic and cost-effective!

Specifications:
Material: Glass & Stainless Steel
Weight: 84.5g
Dimension: 65mm x 24.5mm
Thread: 510
Capacity: 4.5ml

G4 DECK & G2 DECK
Initial available in 2 decks, and more will come soon!

TF-RTA G4 Deck:
Authentic Quad Coil Design
16mm Big Build Deck
0.14ohm (Pre-installed)

TF=RTA G2 Deck:
Dual-Post Velocity Style
16mm Big Build Deck
0.45ohm (Pre-installed)

No Leaking
HIDDEN SEALING RING AND INNOVATIVE JUICE FLOW CONTROL SYSTEM:
For clearomizer or rebuildable atomizer, no leaking is a top-priority task. TF-RTA has more compact body and excellent sealing performance by using hidden sealing ring. Along with the innovative juice flow control system, you can close the juice flow slots before filling or replacing deck to prevent leaking.

PATENTED SWIVEL TOP CAP DESIGN
TFV4 classic swivel-cap design makes top-filling as easy as it gets.

DOUBLE-LAYERED DRIP TIP
The drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.
Heat Shield (1-2mm Spacing
Inner Tube of Glass
Outer Tube of stainless Steel

ADJUSTABLE AIRFLOW SYSTEM
With four large air slots at the base, you can control airflow as you like.

HOW TO BUILD THE RTA(G4)

  1. Before starting make sure your hands are clean.
    2. Taking the TF-RTA G4 deck apart.
    3. Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw
    4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
    5. Cutting a strip of cotton and make sure it's just larger than the coil you built. 6.Inserting the cotton, and placing it in the middle.
    7. Cutting the wick at an angle and make sure it's not too short and not too long.
    8.Wet the coil with your e-liquid and adjust the wick.

Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

HOW TO BUILD THE RTA(G2)

  1. Before starting make sure your hands are clean.
    2. Taking the TF-RTA G2 deck apart.
    3. Installing the pre-wrapped coil. Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
    4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
    5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
    6. Inserting the cotton, and placing it in the middle.
    7. Cutting the wick at an angle and make sure it’s not too short and not too long.
    8. Wet the coil with your e-liquid and adjust the wick.

Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

G4 Edition Includes:
1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G4 Deck (Pre-installed)
1 x Cross Point Screwdriver for G4 Deck
1 x Replacement GlassTube
1 x SMOK Vape Band
1 x User Manual
Spare Parts

G2 Edition Includes:
1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G2 Deck (Pre installed)
1 x Allen Key Screwdriver for G2 Deck
1 x Replacement Glass Tube
1 x SMOK Vape Band
1 x User Manual
Spare Parts

 

Added to cart

c