Vision Spinner II Variable Voltage

Vision

Vision Spinner II Variable Voltage
  • Vision Spinner II Variable Voltage
  • Vision Spinner II Variable Voltage
  • Vision Spinner II Variable Voltage
  • Vision Spinner II Variable Voltage
  • Vision Spinner II Variable Voltage

Vision Spinner II
A very Powerful and upgraded 1600 mAh battery Upgraded & more stable PCB control head Much more comfortable and very ergonomic spin dial for adjusting your volts Much Longer life spans for the new upgraded PCB and battery cells Operating Volts (output): 3.3 to 4.8V Charging voltages(inputs): 4.2V / 420mA

Compatibility All 510 threaded accessories The Spinner II has a lot of improvements from its prior generation. Combining all the best features & advantages of the 1st Gen but also created an entirely new & unique Vision Spinner II battery.  - Featuring a New upgraded and more stable PCB control head  - A beautiful ergonomic spin dial for adjusting voltage  - A Brand new and upgraded battery cell of 1600mah that makes the Spinner II much more powerful! - A longer life span for the new upgraded PCB and battery cell.

Instructions:  

Turn on or off the battery 
• The battery is turned on or off simply by pressing the button 5 times within two seconds 
• When the battery is off, the button will flash three times to indicate that battery is activated 
• When the battery is on, the button flashes three times in a pattern to indicate that the battery is off

Set up the voltage output 
• The Vision Spinner II is capable of outputting voltages from 3.3v to 4.8v 
• The bottom dial indicates the position of the voltage output level 
• Simply Rotate the bottom dial to align the red line with the bottom dial to get the desired voltage level, that’s it! 
• The red line on bottom spin can stay at any position along the scale from 3.3v to 4.8v.
• Please be aware that the red line moves between 3.3v - 4.8v along the scale so do not push the red line on the bottom dial over the 3.3v clockwise and 4.8v counter clockwise position, it may damage the battery if it is being pushed too forcefully 

Power indicator  
• The vision Spinner II can display three colors on the button to indicate the battery usage levels
 
• If the button displays a
White color when the battery is on, that indicates a remaining 60%-100% in battery power  
• If the battery displays a
Blue color when battery is on, it indicates a remaining 30%-60% battery power left  
• If the button displays an
Orange color when the battery is on, that indicates a remaining 0%-30% in battery power (that means it is time to charge your battery)  
• If The button flashes 15 times in a mixed pattern color that means there is NO power at all left in battery and it can no longer function without being properly charged again
 

Other important facts 
• Built in Short circuit protection.
• Working time protection - when the battery is on, if the button is pressed nonstop for more than 8 seconds, the button flashes 5 times and then shuts down the output instantly. 
• Charging time of the Vision Spinner II, for the large mAh capacity of 1600mah, it requires about 5 to 6 hours to be properly fully recharged if charging from zero power level. 
• The Vision Spinner II like all ego & 510 batteries, requires a standard USB charger of 420mah as well as a wall adapter of 500mah output. Any use of non-standard chargers with higher outputs such as iPhone & Android chargers, can likely damage the battery and cause unwanted consequences therefore the use of non standard chargers on Vision Spinner II is strictly prohibited and immediately invalidates the warranty.

Added to cart

c