OBS Cube 80W Starter Kit with Cube Tank

OBS

OBS Cube 80W Starter Kit with Cube Tank

OBS Cube 80W Starter Kit with Cube Tank

The OBS Cube 80W Starter Kit with Cube Tank is a simple, user-friendly device with a cube-like appearance perfected by a state of the art machining and polishing process. The ergonomic design consists of an LED display screen and a three-button control interface with variable wattage. The lustrous Zinc Alloy chassis of the Cube 80W Box Mod has compact dimensions of 81.5mm x 30.6mm and a lightweight of 152g. Inside the Cube Mod is a longlasting Li-ion 3000mAh 23600 battery that can be recharged through the mods Micro-USB port. This industry standard Micro-USB port is capable of 1.5A quick-charging with an average 2-3 hour charge time and can be used to upgrade firmware as it becomes available. This battery sends power to a bright 0.96-inch LED screen that continually displays battery life, wattage, resistance, voltage, a puff counter, firing time, and lock status. Free of unnecessary modes like temperature control, you can use the two adjustment buttons to simply adjust your wattage from 5-80W in one watt increments. Above these two buttons is an oversized firing button that continues a trend of stylish silver that goes well with the modernized look of the kit while sending an instantaneous ten millisecond firing speed to your tank. You can use the adjustment buttons to lock the screen with three clicks and the firing button to turn the device on or off with five clicks. The OBS Cube 80W Box Mod has a charging current of less than 60uA while operating within voltages of 3.2-4.2V and atomizer resistances of 0.1-3.0 ohm. Safety features of the Cube Mod include short circuit protection, overcharge protection, voltage protection, over-temperature protection, over time protection, and low voltage protection.
Attached to the OBS Cube 80W Box Mod through a Gold-plated threaded 510 connection is the OBS Cube Sub-Ohm Tank. The Cube Tank is composed of superior 304 Stainless Steel and durable Pyrex glass that together make up dimensions of 47mm x 25.5mm and a lightweight of 93g. At the top of this tank is a uniquely designed wide-bore 810 Delrin drip tip that has a distinctive mouth feel unlike the standard drip tips you may have used before. Below the mouthpiece is a threaded top cap that provides convenient top filling by simply giving it a quarter turn. Removing the top cap will expose extremely large fill ports that allow access into a large 4mL e-liquid capacity reservoir. When filling your tank, always be sure to use the designated fill ports and to let your coil be fully saturated before use. Pre-installed inside the OBS Cube Sub-Ohm Tank is the 0.2ohm M1 Coil Head with a Kanthal mesh heating element. The M1 Coil Head is rated for use between 50-80W but is recommended for best use at 65-75W to optimize heat distribution and airflow. To open or restrict the airflow, the OBS Tank has dual bottom adjustable air slots that measure 12.5mm each. Stoppers at both ends of the airflow slots make the tank easier to take apart and clean when necessary. If you want a sleek device with unparalleled style and a comfortable grip, then vape with the OBS Cube 80W Starter Kit with Cube Tank.

OBS Cube Tank Features:
Dimensions: 30.6 x 30.6 x 128mm (D x W x H)
Construction: Zinc Alloy
Ergonomic Design for Comfortable Grip
Output Mode: VW / VV / VT-Ni / VT-Ti / VT-SS
Output Wattage: 80W Max
Output Voltage: 3.2 - 4.2V
Resistance Range: 0.1 - 3.0 ohm
Display: 0.96" OLED Display
Battery: 3000mah Built-in Rechargeable Battery
Vape Time Counter
Tank Capacity: 4ml
Top Fill System
510 Gold-Plated Connection
810 Bore Drip Tip
Airflow: Dual Bottom
Safety Features: Short Circuit Protection / Overcharge Protection / Voltage Protection / Over-Temperature Protection / Over-Time Protection / Low Voltage Protection

Kit Includes:
1 x Cube Mod
1 x Cube Tank
2 x M1 Mesh Vape Coil
1 x Micro USB Cable
1 x User Manual
1 x Spare Parts

Added to cart

c