Joytech Cuboid 150W TC MOD

Joyetech

Joytech Cuboid 150W TC MOD
  • Joytech Cuboid 150W TC MOD
  • Joytech Cuboid 150W TC MOD
  • Joytech Cuboid 150W TC MOD
  • Joytech Cuboid 150W TC MOD
  • Joytech Cuboid 150W TC MOD

Cuboid 150W TC MOD

Cuboid, applies Variable Temperature Control system with firmware V3.0 and 150W output, having Temp-SS316 and customized TCR available now. 
It is powered by two replaceable 18650 cells with the new slip-open cover.
Multiple colors, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive catering to your preference. 
Upgradeable firmware enables it always up-to-date. Now you can upgrade your Cuboid to 200W via VT Software.

Specifiaction:

  • Dimensions: 92mm L x 41mm W x 29mm D
  • Stainless Steel 510 Threads
  • Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
  • Output Wattage: 1-150W
  • Temperature Control Range: 100 - 315C / 200 - 600F
  • Resistance Range: 0.05-1.5ohm for Variable Temperature Mode
  • Resistance Range: 0.1-3.5ohm for Variable Wattage Mode
  • Requires (2) 18650 High Amp Batteries (sold separately)
  • Upgradable Firmware
  • Multi-Colored 0.96-inch OLED Screen
  • Dual Battery Display Bar
  • New Slip-Open Battery Cover for Simple Battery Changes
  • Micro USB Port for Firmware Updates and Charging
  • Reverse Battery Polarity Protection
  • New Firmware V3.10 for Cuboid Available

150W Output and Dual Battery Bar

Cuboid uses two replaceable batteries with the new dual battery bar. The maximum output can be reached to 150W, making it powerful and convenient. We kindly recommend high-rate 18650 cells with rated discharge current≥25A

  • PLEASE AVOID USING BATTERIES WITH A CRACKED SHELL FOR SAFETY
  • WE SUGGEST USING BATTERIES WITH THE VOLTAGE DIFFERENCE UNDER 0.3V

New Slip-open Cover and Battery Reverse Polarity Protection

The new slip-open cover on the bottom enables you change your battery swiftly by pulling the slider over. With the onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation.

Please pay attention to the positive and negative terminal signs when installing new batteries.

Exquisite 510 Stainless Steel Thread
Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.

Charging & Upgrading

We would suggest you take out the cells (batteries) and charge them with a separate charger. The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device.

Firmware Upgradeable

Cuboid comes with the upgradeable firmware. Having Version 3.00 for Cuboid, Temp-SS316 and TCR are available now.

New Firmware V3.10 for Cuboid

Cuboid can be upgraded via VT Software. The new firmware V3.10 for Cuboid, making the maximum output up to 200W.

Box Contents:
1 x Joytech Cuboid 150W TC Mod (no cell)
1 x USB Cable
1 x Manual

***90 Day Manufacturer’s WARRANTY on this item***

Added to cart

c