Innokin Endura T20 Full Kit


Innokin Endura T20 Full Kit
  • Innokin Endura T20 Full Kit
  • Innokin Endura T20 Full Kit
  • Innokin Endura T20 Full Kit

Endura T20 Full Kit

It’s easy to vape great! Simply pop the protective top cap off and pop it on the bottom. Click the high-quality power button three times to power on and the amazing PRISM T20 coils will create incredibly delicious clouds of flavors for you to savor & enjoy. Vape the Endura T20 for a smoother, more open draw than the Endura T18 and the flavor focused PRISM T20 coils are designed and tested to wick high VG eliquids. The Delrin cap is easy to twist open and fill. The Endura T20 is charged via micro USB, has integrated high quality safety and charging protections and is available in 1500mAh. Powered by the Innokin A1 Chipset, the Endura T20 is small in size and big in performance!
Initially available in four beautiful and durable finishes (Black, Silver, Red and Blue) the Endura T20 is the ultimate, compact flavor chasing kit!
Incredible flavors at the touch of a button. Experience vaping bliss with the Innokin Endura T20.

Endura T20 Features

15 Second Cut-off: If the button is held for 15 seconds or longer the Endura T20 LED lights will flash and then stop firing until the button is released and pressed again.

Low Voltage Warning: The Red LED will blink for eight times when the battery capacity is lower than 3.3V and the Endura T20 will automatically power off.

Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the Endura T20 against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The Endura T20 features automatic real-Time atomizer Ohms detection. If the resistance of the atomizer is lower than 1.2 ohm, the LED will stay on 5 seconds and the Endura T20 will not power on.

Over-charge Protection: Charging voltage 4.5~6.0V, charging current 500mA.

Overheat Protection: The red LED will blink 3 times if the PCB is overheated.

‘Vape while charging’ Technology: The Endura T20 is recharged with a Micro USB cable. When plugged into a power source the Endura T20 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while charging’ pass-through technology.

Battery: 1500 mAh
Standby Current: 100 uA max
Maximum Output Wattage: 13W Maximum Output Current: 3.5A
Maximum Output Voltage: 4.5V Resistance: 1.2ohm-3.5ohm
Resistance: 1.5 ohm Charging: Micro USB DC 5V/1A

Included in the Kit:
1 x Innokin Prism T20 Tank
1 x Innokin Endura T20 1500mah Battery
1 x 1.5ohm Endura T20 coil
1 x Micro USB charging cable
1 x Accessories
1 x User manual

Added to cart