DotMod | DotRDA 24mm V1.5

DotMod | DotRDA 24mm V1.5

Sale price$95.00
Sold out


Pickup currently unavailable at Itsvaping - Tuggerah

DotMod | DotRDA 24mm V1.5


Itsvaping - Tuggerah

Pickup currently unavailable

168 Pacific Highway
Shop 4
Tuggerah NSW 2259


*Must be familiar with coil-building. Coils not pre-installed*

Beauty, inside and out. Inside you will find a brand new enhanced top and bottom pin along with a ceramic insulator. This Squonk and drip ready RDA is equipped with a 4.8mm deep juice well. This RDA features a huge 1.5mm x 3.9mm clamping space to accommodate your craziest builds.

Choices. With the choice of your favorite color aluminum cap, Ultem, or Stainless Steel, your DotRDA V1.5 will match any of your Dotmod products.

Assembly. The DotRDA V1.5 features a solid brass deck that has been beautifully plated in 24k gold, Interchangeable center pins for use with any mod, and can be built or disassembled with the use of the included tools.

Package Includes:

1 x DotRDA 24mm V1.5 
1 x Cap (aluminum, Ultem, or stainless steel)
1 x DotKey
1 x Allen wrench
2 x DotCoils
2 x drip tips (Black and Ultem)
1 x Spring
3 x O-rings
1 x 24k gold plated 510 Squonk pin set
Certificate of authenticity

This product is for advanced users only 

  • Rebuildable atomiser: The user of this atomiser must install wick and wire (coil) in order to use it.
  • This atomiser is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:

  • Rebuildable atomiser coils and wicks have known risks.
  • Rebuildables are for experts, not average or beginner vapers with no multi-meter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work.
  • These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics. 

This is because:

  1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
  2. If it is not tested it is entirely the risk of the user.
  3. Faulty wicks/coils WILL blow electronic devices.
  4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
  5. No new coil/wick assembly should be used on an electronic device until known to be safe.
  6. These items destroy electronic devices if faulty. This is a known issue.